BEARING ITALIA S.P.A

Roller bearing piloted flanged units for inch shafts

Spherical roller bearing flange cartridge unit has a cast iron housing with four bolt holes, floating labyrinth seal, and spring-locking collar. This non-expansion type bearing unit is designed for mounting onto bearing surfaces perpendicular to the shaft axis. This ready-to-mount flange cartridge unit has a one-piece housing made of cast iron for rigidity and vibration damping. The housing has a powder coating for corrosion resistance, a grease fitting on the outer surface for reapplying lubricant, and a machined mounting surface for increased stability. A cylindrical pilot extension on the back face provides accurate placement in the mounting surface bore during installation, and increases stability during operation. The double-row spherical roller bearing in the housing has a large roller complement to support heavy radial, shock, and combination loads. It has a separable outer ring, an extended inner ring for increased shaft support, and a convex sphered outer surface that compensates for misalignments. Floating labyrinth-design gap seals on both sides of the bearing retain lubricant applied at manufacture and help protect against contaminants. The bearing locks onto the shaft with a spring-locking collar and two setscrews for a positive lock on the shaft. This lock type minimizes ring distortion and vibration and is suitable for low to moderate speed applications where the shaft rotates in a single or reversing direction. Flanged bearing units are suitable for use in industrial and commercial applications including conveyors, fans and blowers, construction machinery, and processing equipment, among many others.

skf FYRP 1 15/16 Roller bearing piloted flanged units for inch shafts
6.2 in
Light Series
skf FYRP 1 11/16 Roller bearing piloted flanged units for inch shafts
98500 lbf
0.060 in
skf FYRP 2 3/4-18 Roller bearing piloted flanged units for inch shafts
VKBA 3330
NISSAN / PATROL / e
skf FYRP 1 3/4-18 Roller bearing piloted flanged units for inch shafts
312 mm
2700 kN
skf FYRP 2 1/2-3 Roller bearing piloted flanged units for inch shafts
19000 r/min
62
skf FYRP 3 1/2-18 Roller bearing piloted flanged units for inch shafts
5.5 in
Two-Bolt Plummer Blo
skf FYRP 2 1/2-18 Roller bearing piloted flanged units for inch shafts
180x320x52
4 mm
◂ Previous page Next page ▸
All Products Contact Now
Product Categories
Deep groove ball bearings
Deep Groove Ball Bearings (6000, 6200, 6300, 6400)
Double row spherical roller bearings
Needle roller bearings-Needle roller and cage assemblies
Plain bearings,Bushings
Power transmission seals,V-ring seals for North American market
Power transmission seals,V-ring seals, globally valid
Radial shaft seals for general industrial applications
Radial shaft seals for heavy industrial applications
Radial spherical plain bearings
Roller bearing piloted flanged units for inch shafts
Roller bearing round flanged units for inch shafts
SAF and SAW pillow blocks with bearings on an adapter sleeve
SAF and SAW pillow blocks with bearings with a cylindrical bore
Self-aligning ball bearings
Single direction thrust ball bearings
Timken 759 Bearing
Timken 14276 Bearing
33889 Bearing
Timken Hm88510 Bearing